407 heater valve

[Stuart]

Hi Richard, Not completely certain but UK eBay item 290326979175 for
a Sunbeam Alpine looks pretty close. I'm looking at the fitting to
the heater matrix, which is the O-ring type with flange, position of
control cable and the other water connection. The Sunbeam one (and
all others advertised) do however have a pressed steel cover on the
control cable side rather than the original die cast version, maybe
when sprayed black it will look OK. Otherwise I might try and fix
the original die cast cover to the new valve as that part of mine is
OK, it's the other side that has corroded away.

Confirmation later when my sister in UK procures it and ships it to NZ...


Further to earlier posts regarding the limiting straps on the rear
axle of the 405 and other 2 litres.... I used some similar width tie
down strapping rated at 1 ton, cut to length, after a few trips in
the NZ mud I'm sure they will look fairly original...


Stuart