21-05-20, 11:32 AM
|
|
Member
|
|
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,183
|
|
Sorry about the delayed responses!
Quote:
Originally Posted by peter dowdle
Kevin
I have had brackets made up to install the vintage air compressor to our motors.They bolt slightly to the right of the thermostat housing in the valley.I can have extra sets made quite easily and cheaply if you wish. This setup requires the alternator to be moved to the left of the motor above the steering box.
|
Thanks Peter,
Any chance of a photo?
My alternator has already been moved. The main issue I have, (other than the fact that I'm using a very inefficient Chrysler compressor), is that my power steering pump is on an angle!
Quote:
Originally Posted by paul robert
Hello Kevin,
Here goes. Remember this is a LHD Interceptor with a 440. But the kits fit RHD as well and all brackets and bolt on points are the same as on 383...
|
Thanks Paul. That's one very clean engine bay! Interesting to see those rocker covers - did they come standard with "Jensen" cast (or machined) into them?
. |
Threaded Mode