06-05-20, 02:29 PM
|
|
Member
|
|
Join Date: Mar 2015
Posts: 14
|
|
Hello Kevin,
Here goes. Remember this is a LHD Interceptor with a 440. But the kits fit RHD as well and all brackets and bolt on points are the same as on 383.
The kit came with all bits needed, brackets hoses, dryer, condenser, the lot and was a doddle to install.Please note I have a higher output alternator and have a similar one on the 411 but mounted on the other side of course.
The fan shroud is original Jensen with newer Bosch fans off an Audi. the rubber flap let air though at speed but the fans pull them closed when they're on.
As I said the condenser sits in front of the radiator but does not have its own fan. Hope this helps, best Paul
|
Threaded Mode