401 to 403 Zeni door key blanks

[Geoff Dowdle]

John,
In the past I posted the following

"Dominion in Canada had a "L62N"

Davenport - Burgess in UK had a "H024"

These are the only blanks that I know of that will fit without any modification.

I had a small batch of similar blanks modified to suit the Zeni lock but
have no way of a locksmith cutting the blank to a number.

The lock barrel would have to be removed from the door and taken to a Locksmith with a blank, who could then cut the key to suit.

If you need a couple of modified blanks I should have a few left.

Geoff ,
Sydney, Australia

[Intelligentmetals]

Hi all,

I have been reading the various posts regarding Zeni keys, would someone be able to post a photo of an original Zeni key & perhaps a barrel.

Was the same key used for both the doors / boot & the ignition?

Thanks in advance.

Robin

[peterg]

Originally Posted by Intelligentmetals

Hi all,

I have been reading the various posts regarding Zeni keys, would someone be able to post a photo of an original Zeni key & perhaps a barrel.

Was the same key used for both the doors / boot & the ignition?

Thanks in advance.

Robin

They would only fit the doors. On my 403 there is only one (drivers side) locking door. The ignition is a proprietary Lucas unit. Can't comment on the boot lock as it doesn't have one but again more likely to be a proprietary product with a key similar to the glove box key.