LED upgrade

[David C]

Part numbers I used as follows:

Combined white side bulb with amber indicator 12VWASH_1
Side and tail 12VESTLPOS
Reverse 12V382WH These are cool white but have higher light output.
Instruments 12VE10WW_1 These are warm white. I think there is a cool white option.
Rear indicator 12V15S21WW
Flasher unit 12VFLP
Headlamp bulbs P45TCW600k These are for Marchal units so probably not suitable for Bristol use other than 406.

[Nick Challacombe]

Thank you David, that is very helpful on several counts.
1, I can do it,
2, Where to get them
3, Telephone them rather than email.

Another little job to do, need to get dash out to repait Tacho and Clock, only right twice a day.

Nick

[David C]

My clock is equally accurate albeit almost certainly at different times. I'm afraid I have put off getting it fixed as I haven't had much luck previously. I had the one on the 403 upgraded with an electronic impulse conversion but that didn't last very long. If anyone knows a decent repairer with a reasonable turn around I would like to get it sorted at some point.