Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Diff, Steering and front axle 408

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2 (permalink)  
Old 27-07-09, 12:30 PM
Member
 
Join Date: Jul 2008
Location: Renfrew Scotland
Posts: 71
Default Diff, Steering and front axle 408

Good afternoon Hans
, I to have a 408, Good simple information on the diff is available as a
downloadable manual on the Sunbeam Tiger website, it uses a similar
Salisbury unit There is a UK company who service and supply parts, a Google
search will find them. You may have one locally
The steering box components are, to my knowledge only available from Bristol
cars [Brian Marelli]
The axle itself suffers from corrosion round the 'top hat' turrets for the
front shock absorbers. shocks are available again through Bristol cars and
Koni in Holland. The bottom plate of the axle also corrodes from the inside
out. If removing the axle Tie the front chassis legs in position with
screwed rod and plates to stop spread! Take detailed information on the
bolts holding the axle on as some are different to clear the steering tie
rods>
I found it easier to remove the front axle, rebuild it completely then
replace.
Hope this helps and good luck
David
Reply With Quote
 

Tags
408 steering box


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 02:07 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2