Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Fuel consumption

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2 (permalink)  
Old 17-06-21, 05:35 PM
Member
 
Join Date: Jul 2008
Location: Bury St Edmunds, Suffolk, UK
Posts: 283
Default Fuel consumption V8’s

I travelled 290 miles today back from Wales. I brimmed my tank at the start of the journey with Shell Vpower and again after 210 miles . I used 51.8 litres which Is near enough 11.38 galls which equates to 18.45 miles per gall.
My engine though is the small 313 cu in although now 318 cu in after a rebuild with 40 th over size pistons. Ports have been cleaned up, head slightly planed , crank rebalanced but not much else. Normally we achieve between 16mpg and 17mpg. Today was mainly motorway work including normal British hold ups.
Shell V power is 99 octane. Your engine will of course use more but at twice as much seems excessive. I did reject the Carter carburettor, I increased the size of the radiator, I use a Facet Red top fuel pump and radial Michelin X tyres.
I expect this does not help much but as it was today I thought I would publish result. KR’s. Nick.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 01:54 AM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2