Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

'One-Shot' to grease nipples

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15 (permalink)  
Old 02-03-22, 09:47 AM
Member
 
Join Date: Sep 2021
Posts: 29
Default

One-Shot to grease nipple conversion.
Before pumping Castrol Spherol semi-fluid grease with little added sae 140 (to thin it a bit) into the rack, I decided to try to assess any ‘stiffness’ this more viscous lubrication might produce. I looped a loop of string around a spoke of the steering wheel and attached an expansion spring to it. I pulled the spring until the wheel turned and noted how much the spring had stretched. Before I changed the lubrication, the spring stretched to 110mm before the wheel moved. I repeated this several times and got the same result each time – 110mm. I then took all of the One-shot system out of the car and let any oil drain from all the connections. After adding the grease nipples and the s/fluid & 140 mix I repeated the wheel movement test. Every time I repeated the test, the wheel moved when the spring stretched to 75mm. So much for making it stiffer, though I can understand the reasoning.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 05:24 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2