View Single Post
  #11 (permalink)  
Old 27-09-22, 07:49 PM
David C David C is offline
Member
 
Join Date: Apr 2021
Posts: 229
Default

Hello Peter.
Would it be too obvious to suggest that the four 1 1/2" screws are for the door pulls? If so, do you have these? I have just replaced mine so can help with parts to make new door pulls.

I think one of my regulator squares lost the spring and peg. If memory serves I used a short length of 1/8" welding rod to hold the handle on. It needs to be exactly the length of the outer diameter on the handle so that the sprung finisher holds it in place.
Reply With Quote