View Single Post
  #3 (permalink)  
Old 11-06-19, 06:22 AM
Geoff Dowdle Geoff Dowdle is offline
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 384

looking closely at the photo it looks like the metal is very thin .
Pls advise the thickness .
In the past I have seen cover plates bolted on the side of blocks to cover cracks
or holes but have had no personal experience with this type of repair .
My guess is that the engine would need removal and block stripped and chemically cleaned as a start . Then taken to a competent repairer for advice .

I can not recommed anyone to do the repair as I'm located in Sydney/Australia.
Spencer Lane Jones might advise you after looking at the photo.

Good Luck
Reply With Quote