View Single Post
  #4 (permalink)  
Old 07-09-17, 09:42 PM
Geoff Kingston Geoff Kingston is offline
Member
 
Join Date: Mar 2009
Location: West Wales.
Posts: 458
Default

Mike
Good point about the silicone,I used some 3M sealers that I had for a while, one, putty like strips the other double sided tape, I also sometimes use brushable seam sealer which when dry can be over painted as well.
My local car repairer gave be a small role of the putty type of sealer which he said was ideal for fitting the gearbox covers back so everything has been carefully cleaned and painted (POR15) to make sure we get a good bond, once these panels and a few round the engine and front wing are back on it will be time for the wax.
Geoff
Reply With Quote