Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

411 Tires

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8 (permalink)  
Old 25-01-13, 04:18 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,177
Default

Quote:
Originally Posted by peasantslife View Post
I suspect your car would have been on crossply originally? In which case normally a 85% aspect ratio radial ply tyre works best.....
They wore radials originally, apparently with an 82% aspect ratio.

I don't see any great issue if the speedo reads a little higher than you are actually doing.

Re tire specs - what about load rating and speed rating? Surely these are more important than "Rolling resistance" and "Drive by noise" ?

Peter have you got the steel wheels or the Avon alloys? The Avon safety wheels are wider than the steel wheels.

I believe the axle width and wheel arch size are the same on your S3 as they are on my S5. I think I have 215/70 tires on my Avon alloys and there is no fouling. I'm not with the car at present but I will check and confirm the size tomorrow.
Reply With Quote
 

Tags
411 tires


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 10:18 AM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2