Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Windscreen Wiper Problem - 411 S3.

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2 (permalink)  
Old 24-08-11, 07:54 PM
Member
 
Join Date: Jun 2010
Posts: 7
Default

If the passenger's side is working fine, then it sounds like the wheel box on the drivers side spindle may be the problem. Wipers sometimes stop working because the teeth on the wheel become worn out. As the wipers only go through less than 180 degrees, the teeth on the 'unused' side of the wheel are likely to be fine. So a simple fix is to loosen the wheel box from the rack, turn the wiper spindle 180 degrees and reasemble. It works unless somebody else has done the same trick before on the wheel box of course!
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 07:18 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2