Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

407 tappets

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-03-11, 01:59 PM
MINSTER 407 MINSTER 407 is offline
Member
 
Join Date: Nov 2010
Posts: 11
Default 407 tappets

Hi all
Anyone know the correct tappet clearances for the 407 please ?
  #2  
Old 02-03-11, 04:29 PM
Nick Challacombe Nick Challacombe is offline
Member
 
Join Date: Jul 2008
Location: Bury St Edmunds, Suffolk, UK
Posts: 283
Default 407 Tappet clearance (hot)

The 407 tappet clearance should be adjusted when at full operating temperatures
0.010 inch Intake
0.018 inch Exhaust

The adjustment is made at the self locking rocker arm adjusting screw.
This screw should have a min of 3 ft/lbs. tension as it is turned.
If less than this, replace the adjusting screw and if necessary, the rocker arm.

The above quoted verbatum from the factory workshop manual.
Nick 407 6028
  #3  
Old 02-03-11, 10:36 PM
GREG GREG is offline
Member
 
Join Date: Apr 2009
Location: York
Posts: 808
Default

And you can disconnect one bank of four plugs to slow the revs down a bit !

I have detailed instructions for this and other 407 maintenence procedures in the Newnes Moror Repair Manual that you are welcome to borrow / copy.

Brian Marelli at the Bristol Service Centre is always very helpful.
  #4  
Old 03-03-11, 01:39 PM
Nick Challacombe Nick Challacombe is offline
Member
 
Join Date: Jul 2008
Location: Bury St Edmunds, Suffolk, UK
Posts: 283
Default Oily job

Also as Greg implies, the best way of getting really good results is to adjust them withe the engine running! A large piece of cardboard in front of you helps!.
Great fun but a bit OTT.
Nick 407 6028
  #5  
Old 05-03-11, 03:37 PM
geo geo is offline
Member
 
Join Date: Jul 2008
Location: Dartmoor & Orkney
Posts: 116
Default

Quote:
Originally Posted by Nick Challacombe View Post
Also as Greg implies, the best way of getting really good results is to adjust them withe the engine running!
Nick 407 6028
I agree, I got a fairly good result on my 408 using one of those old SPQR (?) adjusters when the valves were hot and doing a bank at a time (then running to get the other bank back up to temperature).

When I did them conventionally with the engine running, I got the best result but quite a lot of engine oil seemed to find its way on to the exhaust mannifolds . . .

George
  #6  
Old 11-03-11, 01:19 PM
MINSTER 407 MINSTER 407 is offline
Member
 
Join Date: Nov 2010
Posts: 11
Default 407 tappet adjustment

Thanks Nick and Greg. Sounds like i need to get a new supply of Swarfega if I'm to do it with the engine running ! Beats making mud pies though by the sound of it !

A loan to copy (or copy), of the Newnes Repair Manual would be much appreciated Greg. Thanks.
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:46 PM.


This is the live site