411 (Series 3-5) Exhaust Tailpipes

[John Keighley]

Many thanks to all who responded with these suggestions. On Monday I'll take the 410 to Cooma and the workshop with the only exhaust fabricating and pipe bending capability in town will blank off four metal tubes, weld these up, cut a hole in the bottom of each and then fit chrome caps over them to tidy up the job. As we have discovered, there are no exhaust tips of this type available Australia, so we will have to fabricate them. When all is complete I will post results and photos and let you know how we got on. Now armed with this information, I can throw some light for the workshop people on how the set-up should be. Many thanks for the photos, Kevin.
John Keighley