412 Rear axel bearings.

412usa · #1 15-07-09, 09:40 PM

My mechanic tells me that the noise I thought was the differential is in fact a rear wheel bearing. Does anyone have a cross number in order to otain quick replacements.

Peter

Hydroglen · #2 15-07-09, 10:20 PM

Typically you pull the 1/2 shaft and then the bearing. Go to a bearing
supplier with the old one. They will match the numbers and give you a new
one. Do both sides as bearings are very cheap. There is no guarantee that
having a cross number will be of any use, since you can't be sure all
axles used the same ones.
Dorien

Kevin H · #3 16-07-09, 11:59 AM

Peter,

As you probably know it's a Salisbury axle, very likely to be a 4HA or 4HU (with PWR LOCK diff), but as Dorien suggested best way to be sure is to take the bearing out - it will almost certainly have identifying markings on it.

Sorry I can't be of more help, but when you find out can you let us know.

Regards,
Kevin