409 Carpets

[Rubbond]

To my knowledge, the best (traditional) english wool carpets (also for
homes and hotels) were always made by Wilton or Axminster, both made in the
towns bearing the same names, in the South West of England. They were
always the very best. So it's not only a brand, but also a measure of the
quality they produced. And as for the carpets, yes, the backing would
originally have been of jute.

[MYTA21]

Good feedback on the carpet posting! Actaul materials over here in
Australia are rather limited, although Knox Carpets have a reasonable
range. UK based Woollies have perhaps the best retail selection, including
a good one which they label as Wilton. I remember "Boyriven' from my time
n the UK. Another Aussie supplier who quoted wanted 3 times the UK price
for a pretty average carpet.
What I have found is that with some of the pubber or synthetic backed ones,
the pile easily detaches, particularly if too much adhesive is used.
Mike O

[penman]

Hi
From Wiki
Glossary of textile manufacturing - Wikipedia, the free encyclopedia

Wilton Carpet
Wilton carpet is produced on a specific type of weaving machine called wire loom. Wilton carpets are pile carpets whereby the pile is formed by inserting steel rods in the pile warps of the fabric. After extraction of the rods the pile is looped (in case straight wires have been used) or cut (in case cutting wires are used). Wilton carpet is generally considered as high quality and is used for heavy duty applications.
Wire loom,
Weaving machine for pile fabrics or velvets whereby the pile is made by weaving steel rods or wires into the fabrics. When the wires are extracted the warp ends that have been woven over the wires remain as loops on top of the fabric or will form cut pile if the wire is equipped with a cutting blade. This technique is also known as "épinglé weaving". A wire loom in a much wider version (up to 5 meters of width) and in heavier construction is used for the manufacturing of carpets is called a "WILTON" loom, and the carpets made on such a loom are known as "Wilton Carpets"

[lansdownplace]

I wouldn't use a rubberback carpet, they are designed for extremely
light use and the rubber crumbles after a short few years. You need
a hardbacked carpet. If you look at the back there are two main
types, those with the pile glued to a jute type backing which won't
last very well and will disintegrate if they get wet and don't dry
out and those that are woven onto a jute/nylon base. Wilton is the
latter, although it is done in a special way which is what makes it
WIlton, rather than the manufacturer who can be anyone. Most carpets
are made in an 80/20 wool/synthetic mix for wear.

If you are buying carpet of this quality you might as well use the
authentic Wilton weave as anything else.

[Rubbond]

When I read Knox Carpets I thought the writer of this message was pulling my
leg, as that happens to be my surname (no, not Legg).
Wilton it seems patented their first loom in 1741. They are always woven,
since then by machine, using up to 5 colours, and are very hard wearing.
I assume they are now bankrupt?
Andrew Knox.

[Bellerophon]

When I came to replacing the carpets in my 401 I found that the correct
colour was no longer manufactured in England a Fawn was not a popular colour.
However, my local carpet supplier was able to find the best quality Wilton
carpet in the correct colour but manufactured in Belgium. I can tell you
that it is wearing well and will most likely see me out.
My regards,
Bellerophon.