|
|
|
|||||||
| 8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
13-04-25, 08:45 AM
|
|||
|
|||
Mine's a 1980 S2 with round lights in the B posts.
Snag is I can't find where I've put them - but then they were broken anyway. Putting them under the roll bar looks a good plan. I notice that the rear channel is - er - crusty on Olivers 
|
|
13-04-25, 11:28 AM
|
|||
|
|||
|
Hello,
My car is an '87 Beaufighter. Yes, the roof beam was covered in surface rust, but seems quite solid. the bit in photo with daylight coming through rim section is one of worse bits. I found more holes around edges of bonnet and boot. I'm after new rubber seals all round for car. I looked up Martrim, they've got suitable seals for boot and doors. They didn't have sort for where roof joins soft-top. It's about 1"x1" deep - the one along rim in photo.
|
|
| Tags |
| 412, foam, roof, trim |
|
|
Hybrid Mode
