408 With Negative Camber

[jeff02740]

Thank you for your response, but I think you are talking about the shims (washers) that are used with the 1/2 inch bolts on the inner top wishbones that pivot on the subframe and plates that are bolted to the subframe. To my knowledge, those shims do indeed adjust the caster, be it ever so slightly. Other than elongating the 1/2 inch holes on the subframe and moving the inner mounting plates, which are attached by 4 bolts to the subframe, I see no way of adjusting camber. Seeing that this is set from the factory, I do not understand how it could go out of adjustment.