08-07-22, 11:24 PM
|
|
Member
|
|
Join Date: Feb 2016
Location: Canberra, Australia
Posts: 28
|
|
Bristol 603 - window operation
Partial success. I did tests as described by Davis C and found that the drivers switch when stationary was passing my 2v test lamp currents but not the current demanded by the headlamp load. Meanwhile a new switch arrived but had only three connections. Cannibalised the inside of the new with the casing of the old and on test it restored the passenger switch to full working order but the drivers switch is problematical on the UP action, ok on DOWN. Suspect will have to strip it again and check the contacts. Happy to accept what I have until I have more time. Thank you to all who have contributed with advice and information.
|
Threaded Mode