Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

408 Fuel gauge not working diagnosis - opinions, pls?

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7 (permalink)  
Old 15-01-22, 11:53 PM
Member
 
Join Date: Oct 2014
Location: Florida / Nova Scotia
Posts: 270
Default

I am studiously ignoring the brake fluid lamp.

I epoxied the resistance coil bar in its correct position in the fuel sender and added some spacers to stop it moving too far away from the slider if the coil ever does get dislodged again.

I have now re-installed it with new gaskets and it performs in the car as it should. When there were about 2 US gallons in the tank, it read about 1/16 full as it did when I tested it. That's as low as it will go but I can live with that. After adding about 8 US gallons, it read above half full. During driving it did swing about (as it should) in tight bends and over bumps but always returned to above half full.

David
Attached Images
File Type: jpg Fuel sender3 (Copy).jpg (96.6 KB, 12 views)
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 10:16 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2