25-04-21, 09:44 PM
|
|
Member
|
|
Join Date: Apr 2021
Posts: 363
|
|
Back in the '80s I was told my old 4.5:1 units were beyond repair and I was sold a more modern pair of servos that must be a much lower ratio as the pedal pressure required for given braking effort was far higher straight after they were replaced.
The long and short is that I don't have suitable units to trade in but would like to get the brakes back to something approaching original spec. At the moment a pair of 4.25 : 1 units look like my best bet. Other suggestions or reasons not to do this gratefully received.
|
Hybrid Mode
