|
|
|
|||||||
| 8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
16-09-20, 07:42 PM
|
|||
|
|||
Removing unit body
Giles: Tried a 12 lb. lead hammer; torch; rust release.
No luck so I drilled out the bolt...began with a 1/8th inch drill bit and worked up to the full diameter of the bolt. Worked perfectly. Once this bolt was gone, the other five let go right away. 
|
Hybrid Mode
