Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

411 air conditioning

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7 (permalink)  
Old 05-05-20, 06:35 PM
Member
 
Join Date: Mar 2015
Posts: 14
Default

If it is of any interest I can show you the set up in my 75 Interceptor. My 411 does not have A/C and I do not intend to install one.
We've had the Interceptor in the family since new so i've witnessed all the ups/ downs and lessons to be learned.
The A/C never was very effective which I always found strange because American cars are normally known for blowing icecold.
The one you describe is standard Chrysler (twin piston I believe) ware, heavy and eats a lot of power.
Some years ago I bought a complete kit with a Sanden compressor. Bolts right in, much lighter better performance and less power consuming. It also looks better. I think I paid around £950 for the kit at a UK shop catering exclusively to Jensens.
The condenser sits in front of the radiator on top of an engine oil cooler and the fans are pull fans sitting in the original shroud behind the radiator but quite close. I long ago changed the Kenlowes for Audi units of the same diameter.
I looked at the 411 and I think it'll fit in with a minimum amount of fettling.
If it helps I can take some pics tomorrow.
Paul
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 08:09 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2