		Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars
Bristol 410 rear suspension

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Bristol 410 rear suspension

Thread Tools

Search this Thread

Display Modes

#1 (permalink)

08-05-19, 10:37 AM

DODD

Member

Join Date: May 2018

Posts: 87

My problem has been solved following a conversation with another Bristol owner, the only way to remove the suspension arm shaft is to reduce the tension on the torsion bar to the suspension unit and with a little bit of fiddling around remove the shaft from the arm, in fact the whole procedure was about 30 minutes per side including replacing the struts.
Brian

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is Off HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off

All times are GMT. The time now is 08:32 AM.