View Single Post
  #4 (permalink)  
Old 07-03-13, 09:17 AM
Geoff Dowdle Geoff Dowdle is offline
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 386
Default BS Specification

Peter,
I have a Arnolt Manual and have found a reference to the valve timing at 40- 80 -80-40 in section 1 page 8 .
Where is the Valve Timing diagram ??

I suggest you get the engine builder to set up the cam at a centre line of 110 deg and see what the valve timing is at .002 and .009 clearance . This should clarify the timing , there should be a part number on the cam .

Geoff
can you email me a copy
geoff.dowdle@gmail.com
Reply With Quote