Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

Bristol 400, 1950 question about a button

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3 (permalink)  
Old 09-07-13, 03:43 AM
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 416
Default

Roman ,
Congratulations on your purchase. What carburettors are fitted to the engine ?? Solex or SU

The Carb button is a switch to a Solenoid which activates an enrichment device incorporated with the float chamber of the front SU carburettor only .
It will only work if the ignition is on .
There is also a Mixture button which operates a pull cable to a lever on the centre SU carb .
The rear carb has no enrichment /coke device fitted.

In cold weather from a cold start you usually have to activate both buttons , if it starts without it indicates the carbs are set way too rich.

If three Solex cabs are fitted the Carb button is not used , only the Mixture cable .


Could you please advise the chassis and registered number of the 400 and post a few photos on the Forum or direct to me to update the 400 Register

Thanks
Geoff Dowdle
BOC Joint 400 Registrar
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 06:43 AM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2