401 to 403 Zeni door key blanks

[53LHD403]

Originally Posted by GREG

A lot of aerodyne owners only have one door key ! This is dangerous as it's a complicated lock with virtually no spares available -- I have a limited stock of new blanks and I have also obtained a number of patterns for some of the Zeni numbered keys, so please let me know if you require a spare.

Hi I just got 1953 403 LHD and have no keys at all any suggestions ? Thank you Eddie

[Geoff Dowdle]

Eddie,
I have a few blank keys that have been modified to fit the Zeni door locks ,
but have no way a cutting the key except copying an original.
An experienced locksmith could cut the key blanks with the lock removed from the car.

Geoff

[David C]

I managed to rebuild one of these locks some years ago and still have the tool that I made to do it. Happy to offer advice if needed. The locks are not horribly complicated as they only have one rest position so only a single set of pins. Fired up with my success on a 401 Zeni door lock I moved on to a 410 petrol cap lock and very quickly gave that up as a job for someone with more patience than I.

[53LHD403]

Originally Posted by Geoff Dowdle

Eddie,
I have a few blank keys that have been modified to fit the Zeni door locks ,
but have no way a cutting the key except copying an original.
An experienced locksmith could cut the key blanks with the lock removed from the car.

Geoff

Thank you Geoff I also need ignition and glove compartment keys may happen you have them ?or know where to get them ? Thank you Eddie

[53LHD403]

Originally Posted by 53LHD403

Thank you Geoff I also need ignition and glove compartment keys may happen you have them ?or know where to get them ? Thank you Eddie

My door locks were covered for the painting and when I removed the tape those locks have no KEYS they just locks without keys . Have anybody see those 403 locks without locking keys? I’m just floored . Looks like there’s more surprises on the way . Have a good one

[34airflow]

Website for Zeni keys:
ZENI | Cylinder Keys | www.keytrader.co.uk

I bought some of the Dominion keys at a reasonable price in the states. I picked up 10 for about USD 20. They were about $6 ea and I figured I should get 3. So, might as well get 10 for a couple extra dollars. That would give me a cushion for when they screw up a blank at the hardware store.

I don't have the name of the company at hand. I just searched on Dominion along with key number. Two or three companies came up.

[JohnATGreenwich]

Hi all,

I have a right hand drive 403 and it has been keyless since they went astray during restoration work many, many, years ago. I am based in London Greenwich.

The guys at Bristol Motors were able to tell me the key number that came with the car when it was built but having found a fellow Bristoller with the same number key the lock still did not work so I am assuming it's perhaps the pin lock itself thats faulty in some way or perhaps a latter addition with a key unknown.

So can anyone give me some suggestions - I do know that many people over the years have discussed various options but some of these posts date back 20 years so I would be good to try and get a 2023 update from the amazing Bristol community - I know I am not only person with this dilemma.

SO THREE QUESTIONS:

1) Where can I (we) find any original Zeni blanks?,

2) What alternative blanks exists that can work in the Zeni lock,? or / and

3) Someone that knows a locksmith up for and able to get the lock out an able to make some keys.

I believe the Dominion Locks Company from Montreal had a blank with the reference L62N that I know fits - are there any others and what are there numbers.

Any help would be appreciated.

John

[Geoff Dowdle]

John,
In the past I posted the following

"Dominion in Canada had a "L62N"

Davenport - Burgess in UK had a "H024"

These are the only blanks that I know of that will fit without any modification.

I had a small batch of similar blanks modified to suit the Zeni lock but
have no way of a locksmith cutting the blank to a number.

The lock barrel would have to be removed from the door and taken to a Locksmith with a blank, who could then cut the key to suit.

If you need a couple of modified blanks I should have a few left.

Geoff ,
Sydney, Australia

[53LHD403]

Originally Posted by 53LHD403

Hi I just got 1953 403 LHD and have no keys at all any suggestions ? Thank you Eddie

Of course Gregg I will be interested do you also may have ignition and glove compartment keys? Thank you Eddie