Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

Carb set up

Reply
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 12-11-12, 10:31 PM
Banned
 
Join Date: Mar 2011
Location: Hopkinsville, Kentucky
Posts: 188
Default Setting up carburetors-tuning

Depending upon which models were installed on you car, there are some simple ways to synchronise them with few specialised tools, but I would need to know what carbs were fitted. I have used the famous Unisyn on occasion, but am not impressed with the results, and found that tuning by ear is more effective. Another set-up uses what I would call 'needles' that go down in the tops of the carbs where the carbs are replenished with oil. I have no confindence in that method either. If the carbs have seen many miles, then a number of things would have to checked before any 'tuning' is attempted. Normal wear and 'gunking' up from the fuel can cause any number of problems. Best to find a specialist who can clean, refurbish and give you some starting points.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 03:49 AM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2