Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

WARNING Faulty 2 Litre engine cylinder head gaskets

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11 (permalink)  
Old 26-10-10, 11:50 PM
Member
 
Join Date: Mar 2009
Location: West Wales.
Posts: 481
Default WARNING Faulty 2 Litre engine cylinder head gaskets

Kevin
I recently fitted a head gasket set to a Cadillac that had one of the holes from the original design deleted and a note in the kit or the gasket manufacturers website,, I don't remember which, as to why that had been done. The car runs perfectly and does not overheat. The modification was to improve the water circulating characteristics of the engine so it isn't always safe to assume just because it isn't original it isn't right. Didn't I see some comments recently on cooling system mods on this site? If I did can you point me in the right direction as I have just bought a reconditioned 2 Litre engine from BCL and when installed in my 403 my aim is to return the car to normal every day use hence my interest in anything that will make the car practical in every day traffic without spoiling the essential character of the car, all ideas and suggestions welcome, except buying a V8 as I already have two of those on the road!!
Regards,
Geoff.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 01:50 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2