Window regulators

[David C]

Hello Peter.
Would it be too obvious to suggest that the four 1 1/2" screws are for the door pulls? If so, do you have these? I have just replaced mine so can help with parts to make new door pulls.

I think one of my regulator squares lost the spring and peg. If memory serves I used a short length of 1/8" welding rod to hold the handle on. It needs to be exactly the length of the outer diameter on the handle so that the sprung finisher holds it in place.

[peterg]

No, I took them out from inside the door frames. I couldn't work out what they did at the time, which is why I forgot to put them back! Although I am missing a couple of the door pull screws too.

Thank you for the suggestion on welding rod. I'll follow that up

[mikebro]

On the" better late than never" basis, I've just finished rebuilding the first of the two doors. The 1 1/2" screws hold the inside wooden piece down into the door frame.