Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

403 not starting

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10 (permalink)  
Old 13-10-22, 12:41 PM
Member
 
Join Date: Mar 2009
Location: West Wales.
Posts: 473
Default

I have only just spotted this thread as well, years ago on a 403 I had in regular use commuting from Fishguard to Swansea at weekends I had a couple of breakdowns and had to call out the RAC who found water in the carbs, I changed garages but eventually found the problem a couple of small rust pin holes where the fuel filler pipe meets the base of the box it sits in, they were on the top and side of the pipe so in heavy rain some of the water that should have been going past the pipe to the drain in the corner of the box was getting into the petrol. Equally so you could have the same problem with holes anywhere around the base of the pipe especially if the rain water drain is blocked.
I cured the problem by cleaning up the whole of the outside of the base of the pipe where it is welded into the box and sealing it with Petro Patch.
Geoff.

Last edited by Geoff Kingston; 13-10-22 at 06:38 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 07:38 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2