Howdy All

[peterg]

Not sure if your questions were answered.

The engine has a hemi head with a single waist level cam achieved by having a set of push rods transfer across the head to the valves on the other side.

15/40 diesel grade should be OK. Bristol recommended 30 sae over 32 degrees. Most people use 20/50

[403er]

Originally Posted by peterg

Not sure if your questions were answered.
The engine has a hemi head with a single waist level cam achieved by having a set of push rods transfer across the head to the valves on the other side.
15/40 diesel grade should be OK. Bristol recommended 30 sae over 32 degrees. Most people use 20/50

No they hadn't Peter. Thanks for that. Using what I have makes this complicated possession a tad easier.

The delivery should take place Fri. am. Since both are kinda strange cars to me, I'm keeping fingers crossed that they have an owner's manual in the glove box!

Thanks again
Peter (the other one)