![]() |
![]() |
|
|||||||
| 6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||
|
Bela ,
I have had no experience with a J type overdrive but most overdrives used in other cars have a common gearbox and overdrive oil of about 30 grade . I would not use EP90 as it has additives which could make the clutches in the overdrive slip . I suggest you try a Gearbox oil of 30 grade without friction additives . "Penrite" has these possibly in different grades . If you can not locate any gear oil , try a cheap Mineral 10W/30 engine oil. But my suggestion is not a recommendation as I have not used a J type. Surely others on this Forum are using the J type overdrives and can advise!!! Geoff |