403 boot release cable

[mikebro]

Originally Posted by dave dale

I had the same problem with my 403 about a year after I first acquired the car in 1999. Much, much worse was the fact that the boot lid was also jammed shut! We were almost resigned to having to open the boot lid with a jemmy and thus destroy it. It makes me feel queasy to this day when I recall it. Fortunately, we somehow managed to open the boot ( I can't remember how it was done ) and the faulty cable was cut and removed. The whole mechanism was refurbished and fitted with a new cable, which was cut to length. A new nipple at the boot lock end was easily reinstated by, I think, brazing. Such was my paranoia at the thought of the boot lid jamming again that, at the same time, I constructed a secondary release mechanism by way of a second cable which runs directly from the boot catch. This cable passes through the dividing wall behind the rear seat backrest and is connected to a rod which acts as a handle. The handle sits neatly behind the backrest. If the primary release mechanism fails then, by unscrewing and removing the handles for the rear quarterlights, the backrest can be pivoted forwards to expose the emergency handle. I hope that this helps. Dave Dale.

Thanks for that. I will cut off the nipple and withdraw the cable inner. I don't have brazing equipment but there are several pending jobs that have now made up my mind to put that right.