Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

AP Fuel pump

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4 (permalink)  
Old 27-03-14, 11:22 PM
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 428
Default

Peter,
The Pump is a AC brand ( I don't believe there is any connection with AC Cars Ltd) , there are many variations of the same pump fitted to many British cars of the 40's , 50's & 60's
Bases vary in their bolt pattern to the block
The lever that operates the pump from the cam was made especially for Bristol .
Tops (above the diaphragm ) vary a lot also .
The operating rods on the diaphragms vary also

The closest I've found over the years are tops and bases from two different model Standard Vanguards of the 50's but you still need to use the original operating lever from the Bristol AC Pump .

Geoff
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 09:09 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2