Hi David an Steve,
Thanks a lot for the link to the screws. I had the same thoughts as you two Cross heads would look nice and original hex heads are nicer to tighten down. My final game plan was to use Stainless M8‘s with cross heads on the A pillar. These will be very visible opening the door and can be tightened from the back as Steve suggested. On the door site I‘ll go with the hex heads as they go into the captive nuts and are less visible.
Once the screws arrived and I managed to install the doors in a half way presentable manner I‘ll post a pictured the looks.
Thank you both a lot for your help on the screws. I‘d have never figured out the sizes by my self.
|