View Single Post
  #64 (permalink)  
Old 04-10-21, 12:28 PM
Geoff Kingston Geoff Kingston is offline
Join Date: Mar 2009
Location: West Wales.
Posts: 460

We put a facet pump in the boot of my 411 and used bonded rubber bobbin mounts to isolate the mounting plate I made from the boot bulkhead, when we fitted one on my 603 I followed the advice of the late Martin Barns and put the pump and a pressure regulator in the front drivers side wing bay where it works fine , I did not use a pressure regulator on the bigger engine and had no problems.
Reply With Quote