![]() |
![]() |
|
#1
|
|||
|
|||
|
Air cleaner cylindrical air filter case for Bristol 603 or similar. pjhoskin@optusnet.com.au
|
|
#2
|
|||
|
|||
|
I have one from a 411 s2 available but I do not know if it is the same as a 603's. (It is different from a 410's.) I can send a picture tomorrow.
|
|
#3
|
|||
|
|||
|
Thanks, a picture would be appreciated. I am not sure of the differences.
Peter |
|
#4
|
|||
|
|||
|
Sorry for the delay getting back to you.
It is 45cm across the base, with a 32.5cm diameter air filter inside (which needs replacing!). |
|
#5
|
|||
|
|||
|
Thanks Sam, the critical measurement is where it seals with the carb. top. I have changed to a Rochester carb. which may have a different dimension which is 130mm. ie the inner diameter of the hole in the bottom.
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|