30-07-11, 03:36 AM
|
|
Member
|
|
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,177
|
|
I have the dash section that contains the dials half way out (with speedo cable disconnected), but it's fouling on the steering wheel, and obviously I want it to come out with all the wiring connected.
I have removed the centre boss from the steering wheel, (which I was disappointed to discover was held on with silicone rubber), I have also removed the nut but cannot budge the steering wheel.
I don't have a puller which will go over the steering wheel centre - are there any tricks for getting the steering wheel off?
PS. When I say steering wheel "boss" what I really mean is "centre cap"
Last edited by Kevin H; 30-07-11 at 03:47 AM.
Reason: clarification
|
Threaded Mode