10-02-11, 06:19 PM
|
|
Member
|
|
Join Date: Jul 2008
Location: Orkney
Posts: 110
|
|
Quote:
Originally Posted by David Olivant
On looking back the wiring is remarkable simple.[they always say hindsight
has 20/20 vision].
The wires from the switch in the loom are all designated by a LIGHT GREEN
main colour.
. . .
Check the park switch contacts and clean. Watch when replacing
the gearbox cover that the park switch stays in place.
Do not attempt this in place, a divorce will follow!
David
|
From my memory of doing this thirty years ago (I wish I had thought of asking Sid Lovesy!) this is really useful advice — especially the bits about the parking switch and not attempting to do this in situ!
It is really worth doing as even way back then, it made a tremendous improvement to the wipers (and why not go the whole hog and replace the gears on the spindles — or, if no-one has done it before you, rotate them through 180º).
George |
Threaded Mode