Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Indicator Issue

Reply
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old Today, 07:52 AM
Member
 
Join Date: Nov 2025
Posts: 8
Default Indicator Issue

On my 411s3 the indicators are faulty. The rear lights flash with a bright light on the correct side and faint on the other. The front both flash at the same time. I replaced the front wires from the fuse board. Any ideas where I might look for the issue?
Reply With Quote
  #2 (permalink)  
Old Today, 08:36 AM
Member
 
Join Date: Mar 2011
Location: Further up the creek
Posts: 13
Default

It's very likely an earthing issue.

Get your wiring diagram out and start careful fault-finding, checking all connections. But make sure everything is earthing correctly. That's the first place to start looking.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 01:07 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2