Bristol Cars - Owners and Enthusiasts Forum
Page 5 of 5 « First < 34 5
Show 40 post(s) from this thread on one page

Bristol Cars - Owners and Enthusiasts Forum (https://www.bristolcars.info/forums/)
-   8 & 10 cyl Bristol cars (https://www.bristolcars.info/forums/8-10-cyl-bristol-cars/)
-   -   Holley Sniper (https://www.bristolcars.info/forums/8-10-cyl-bristol-cars/2112-holley-sniper.html)

mgdmurray 21-01-26 10:17 AM
PWM fuel pump
 
Quote:
Originally Posted by TonyK (Post 14004)
Good evening all, my first post on the forum. I’m in the process of acquiring a Beaufighter and in my research came across a PWM fuel pump controller, VaporWorks, which runs the pump depending on demand so should be much quieter, just a thought.
Hi Tony

I am very interested in your comment re: PWM fuel pump. Is this a fuel pump that has improved performance? I am guessing you have removed your original carburettor (Edelbrock)?

Appreciate your insights.
Mike

TonyK 22-01-26 10:11 PM
Hi Mike
No need to replace the pump, the box of tricks from VaporWorks (owned by Aeromotive), from what I understand, either has a sensor in the fuel line or uses the vacuum off the carb to sense the amount of fuel required and then controls the speed of the pump to supply the correct amount of fuel to the existing carb. The PWM bit is how it controls your existing pump. So, as the pump isn’t running flat out all the time it’s much quieter. Have a look at the website.
Hope that makes sense.
Tony


All times are GMT. The time now is 10:23 AM.
Page 5 of 5 « First < 34 5
Show 40 post(s) from this thread on one page

This is the live site


Search Engine Friendly URLs by vBSEO 3.6.0 PL2