10-01-09, 09:10 AM
|
|
Member
|
|
Join Date: Nov 2008
Location: Long Beach,CA
Posts: 46
|
|
Dorien:
> If the rod journals are 1.7705 inches dia. (45 mm) the bearings are 1300 cc Alfa Guilietta which I have found to be hard to get in recent years. The MG T-series engine has the same size rod bearings, but they are not Indium lead. However, I have used them and they have held up OK. As I recall, the bearing width is correct for the small-nose crank, but has to be narrowed by 2.5mm. for the big-nose crank.
> Bill
|
Threaded Mode