Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

Oil consumption

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8 (permalink)  
Old 16-08-16, 09:39 AM
Member
 
Join Date: Sep 2010
Posts: 263
Default

My specialist reccommends a rebore with Cosworth pistons at an estimated cost of £6,400 assuming no other work is required.

In between the car has been doing about 400 miles per year and has had 4 oil changes, hence I didn't notice the oil consumption although I thought it a bit low last time.

While I'm thinking of it on the trip to Germany the car was run at 3,200 - 3,500 rpm (65 - 75 mph aprox) at mid 20's c. and the water and oil temperature rose to 90 o F. (oil about 5 degrees lower) with no oil cooler. Fuel consumption was between 24 and 31 mpg.

The engine ran smoothly but was rather lumpy at tick over speeds (5 -900 rpm)

Last edited by peterg; 16-08-16 at 11:15 AM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 12:46 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2