Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

Oil consumption

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6 (permalink)  
Old 16-08-16, 10:02 AM
Member
 
Join Date: May 2013
Location: Droitwich Spa
Posts: 43
Default

Hi Peter. If the engine has had very little use in the 4 years since being rebuilt and only just had a decent run, I would suspect sticking piston rings or possibly a broken ring(s) as a result of long period of inactivity.
I would advise the rebuilder of your problem and seek their advice as to how best to determine the cause. Only when you have found the cause can you decide if the rebuild has been at fault or something caused by long term inactivity.

A 4 year period since the rebuild puts you in a bit of a difficult position so tread carefully as I think you need some goodwill from the rebuilder to help in the diagnosis of the problem and its rectification. Good luck!

Chris.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 07:30 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2