Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

403 windscreen seals

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2 (permalink)  
Old 25-02-14, 03:36 PM
Member
 
Join Date: Jul 2010
Posts: 11
Default

A Bristol owner that has done this work relatively recently and had to extend the drain tubes below floor level as these had perished is Bob Weafer. I will contact him to reply to your post. With regard to the packer, when I supply new windscreen rubbers I also supply a flat strip of rubber which is about 7/8in wide and 3/32in thick. The windscreens bed down on this and the seals fit on the front of this to give the cosmetic effect. Any water that gets past these two seals is taken care of with the drains. I hope this is useful. John Lawley
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 04:46 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2