View Single Post
  #7 (permalink)  
Old 07-06-19, 06:18 AM
Geoff Dowdle Geoff Dowdle is offline
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 301
Default

Bela ,
If the camshaft is a late 403/404/405 grind the advertised timing is
Inlet opening 36 BTDC
Inlet Closing 76 ABDC
Duration 292 deg (this is further away from the 258 deg of the notes.)
Lobe lift .205 inch
Recommended valve clearance .005 cold

I suggest you adjust the valve clearance firstly at .002 inch and rotate engine until you can not push the rocker sideways , as per my earlier post.
Then repeat at .005 inch clearance

--------------------------------------------------
The hand written notes could have been of the original badly worn camshaft before the engine was stripped for a rebuild.

Geoff
Reply With Quote