View Single Post
  #13 (permalink)  
Old 17-11-18, 07:03 PM
Geoff Kingston Geoff Kingston is offline
Member
 
Join Date: Mar 2009
Location: West Wales.
Posts: 267
Default

Peter,
There you be nothing wrong in my view in modifying the arrangement to fix the bottom of the cover with studs as well. It would require a slightly deeper front panel on the heater shelf and I would have thought 3 or 4 press studs would not only look neater but the cover would be a lot easier to remove should the need arise.
I think the metal strip that Kevin has photographed must be on the inside of the cover on my car as all I can see are screws in the outer lip of the strip running along the front of the shelf, it is obviously well located not just relying on a few screws through the vinyl.
Geoff.
Reply With Quote