View Single Post
  #31 (permalink)  
Old 28-10-18, 10:43 PM
peter dowdle peter dowdle is online now
Member
 
Join Date: Jul 2008
Location: woodhouse australia
Posts: 245
Default 411 sticking back brakes

As i mentioned in my earlier post I had similar problems > To clarify the problem can you post a photo of the master cylinder. Series one and two cars have varying master cylinders than 3 4 & 5. My series 2 had an unusual type off a commer 3 ton step thru van. Parts and replacements are very hard to source. It also has an unusual mounting system , for these reasons the range rover cylinder is the way to go. If you decide to go down that track I can guide you through the conversion. Yes the original cylinder if the same as mine is very hard to remove and replace.

A photo if you can please
Reply With Quote